The fixed connection consists of a standard socket and lock nut and is used for connections that cannot rotate freely. A reliable screw connection – especially for large reinforcement diameters.
If a reverse bend connection reaches its limits, the fixed connection offers a suitable alternative for reinforcement diameters ≥ 12 mm. If free rotation of the connection reinforcement is not possible in the second concreting section, for example with fixed reinforcement stirrups, the fixed sleeve is used:
In the 2nd construction phase, a threaded bar with a loose screwed-on locking nut and pre-assembled screw socket is connected according to the working instructions. A special fixing sleeve is not required. The fixed connection consists of a standard socket and the
corresponding locking nut.
CUSTOMER SERVICE
+49 9427 189-320
cstmrsrvcmxfrnkcm
Max Frank Middle East FZE
M3-15, P. O. Box: 123601
Saif Zone, Sharjah
United Arab Emirates