UAE: english
International: english
Australia: english
Austria: deutsch
Canada: english
Czechia: český
Denmark: dansk
Finland: suomi
France: français
Germany: deutsch
Hungary: magyar
Netherlands: nederlands
Poland: polski
Romania: românesc
Slovakia: slovenčina
Spain: español
Sweden: svenska
Switzerland: deutschUAE: english
United Kingdom: english
Threaded connection MAX FRANK Coupler
Mechanical connection and anchoring of rebars by means of weldable couplers for permanent and dynamic loading
The newly developed MAX FRANK threaded socket connections are used where the conventional splice joint is not practicable or not allowed. They are also used where rebending is not possible due to the rebar diameter.
The rebar connection usually consists of a threaded rod with a pre-mounted threaded coupler for the 1st construction phase as well as the continuation bar for screwing in during the 2nd construction phase.
Threaded coupler connections offer an efficient and cost-effective way to connect with reinforcing bars under permanent and dynamic loads.
Approval from the German Institute of Building Technology Berlin for rebar diameters 12 - 40 mm for standard, positioning and reducing connections as well as end anchors (Z-1.5-282).
Advantages
- Easy and quick installation
- Available for all common rebar diameters (12 – 40 mm)
- 100 % force transmission – "bar break"
- No reduction in the rebar cross-section
- No positioning couplers required
- Designed to conform to international standards: Eurocode 2 (NEN/DIN/BS EN 1992-1-1), ACI 318 type 1-2, test standard ISO 15835
- KOMO® certificate
- Approval Romania
Product variants
Threaded connection MAX FRANK Coupler standard connection
for freely rotatable coupler connections
Threaded connection MAX FRANK Coupler positioning connection
for non-freely rotatable coupler connections
Threaded connection MAX FRANK Coupler reducing connection
for force-locked connection of different steel diameters
Threaded connection MAX FRANK Coupler weldable coupler
Connection of rebars using steel components
Threaded connection MAX FRANK Coupler end anchor
Anchoring of rebars
Threaded connection MAX FRANK Coupler product combinations
for high load-bearing capacity in the construction joint (indentation for shear force, indentation for thrust)
System solution
Product download
Test certificates / approvals
Application guidelines / instruction of use
Environmental declarations
Advice
Are you interested in one of our products?
Our team of specialists are always on-hand to help.
Please talk to us or complete the contact form.
Still not found the right solution?
We shall be happy to work together with you on an individual solution for your building project – from product combinations to custom-made products.
Max Frank recommends
Rotterdam
Ayia Napa
Göteborg
Max Frank Middle East FZE
M3-15, P. O. Box: 123601
Saif Zone, Sharjah
United Arab Emirates