International: english

Australia: english

Austria: deutsch

Canada: english

Italy: italianodeutsch

Netherlands: nederlands

United Kingdom: english

Homepage

Products

Sealing technologies

Fradiflex^® metal water stop for element walls

Share contents

Metal water stop for element walls Fradiflex^®

Water stop in concrete working joints

Butt-joints of precast element walls must be designed according to the guideline for watertight structures as a controlled crack cross-section.

The Fradiflex^® element wall sealing system for joints and corners causes a controlled crack at the joints of the triple wall and reliably seals the precast element joint. No additional sealing measures are required. (White tank)

The stable design of the precast element controlled crack elements significantly reduces the assembly times. The Fradiflex^® metal water stop only needs to be fixed at two points and there is no need to attach it to the shell.

The combination of Fradiflex^® metal water stop and element wall (precast element) with Fradiflex^® roll (floor slab) is the optimal solution for pressing water.

Advantages

Galvanized steel sheet with bitumen-free special coating guarantees sustainable sealing
Metal water stop with CE mark
Fast installation thanks to two fixing points
Stable, vertical and positionally secure element

Product variants

Metal water stop for element walls Fradiflex^® – controlled crack joint element

with special coating for in-situ concrete joint

Metal water stop for element walls Fradiflex^® – controlled crack inducer corner strips

with special coating for precast element corners

System solution

Product download

Product list

(23,52 MB)

Sealing Technologies - for watertight concrete structures

(10,33 MB)

Test certificates / approvals

Technical data sheet

Application guidelines / instruction of use

Environmental declarations

product_download_bim

Safety data sheets

Advice

Are you interested in one of our products?

Our team of specialists are always on-hand to help.
Please talk to us or complete the contact form.

Find contact

Still not found the right solution?

We shall be happy to work together with you on an individual solution for your building project – from product combinations to custom-made products.

Learn more

Max Frank recommends

Intec^® injection hose systems seal concrete working joints safely and sustainably. Find out about the Intec^® variants.

ProductInjection hose system Intec^®

Nová Karolina is one of the largest urban development projects in the Czech Republic. Modern apartments as well as office and commercial buildings have grown up in Ostrava.

ProjectNová Karolina Park
Ostrava

Coated metal water stops have been established to be simple and secure solutions in sealing construction cold joints. However, in the event of unanticipated joint movement, late shrinkage or ground movement, the primary seal can become compromised and crack injection may be necessary to seal the joint.

NewsHow to: Redundant construction cold joint waterproofing using coated metal water stops and injection hose