Australia: englishAustralia: english
International: english
International: englishInternational: english
Australia: english
Australia: englishAustralia: english
Austria: deutsch
Austria: deutschAustria: deutsch
Canada: english
Canada: englishCanada: english
Czechia: český
Czechia: českýCzechia: český
Denmark: dansk
Denmark: danskDenmark: dansk
Finland: suomi
Finland: suomiFinland: suomi
France: français
France: françaisFrance: français
Germany: deutsch
Germany: deutschGermany: deutsch
Hungary: magyar
Hungary: magyarHungary: magyar
Italy: italiano
Italy: italianoItaly: italianodeutsch
Netherlands: nederlands
Netherlands: nederlandsNetherlands: nederlands
Poland: polski
Poland: polskiPoland: polski
Romania: românesc
Romania: românescRomania: românesc
Slovakia: slovenčina
Slovakia: slovenčinaSlovakia: slovenčina
Spain: español
Spain: españolSpain: español
Sweden: svenska
Sweden: svenskaSweden: svenska
Switzerland: deutsch
Switzerland: deutschSwitzerland: deutsch
UAE: english
UAE: englishUAE: english
United Kingdom: english
United Kingdom: englishUnited Kingdom: english

Dock

Palma de Mallorca, Spain

MAX FRANK supplied Stremaform® permanent formwork for construction joints, assembled on the seabed, for the extension of the "Muelle Poniente Norte" dock in the harbour of Palma de Mallorca.

Palma de Mallorca has the largest harbour and airport in the Balearic Islands. To better-manage the increasing number of tourists, it became necessary to expand the "Muelle Poniente Norte" dock in the harbour by more than 36,000 square metres.

The project involved the placement of nine prefabricated concrete boxes, each with a length of 42.50 m, a width of 15.50 m and a height of 15.90 m, on the seabed. A total of 4,200 m3 of underwater concrete was poured in layers of 1.05 m in height.

For the dock, MAX FRANK supplied Stremaform® permanent formwork units as substantial L-sections with a height of 2.10 m, a width of 2.20 m and a base of 0.80 m. Special elements were developed and manufactured for corner applications.

The pre-assembled Stremaform® units were positioned on the seabed using conventional lifting equipment. Due to the self-supporting construction and the weight of the fresh concrete during the concreting process, Stremaform® securely fixes itself to the substrate, withstanding the concreting pressure.

One of the major advantages of using Stremaform® is the reduction of working time under water (diver hours), resulting in significant cost-savings. Since most of the shuttering and assembly work is carried out before the formwork is submerged and dismantling of the elements is not required.

Stremaform® permanent, self-supporting formwork for underwater construction joints

  • Stremaform® jointing formwork for underwater base slabs is a prefabricated self-supporting system.
  • Stremaform® sections are connected and assembled at the construction site.
  • The supporting foot of the L-section and the diagonal braces, which are fitted on site, allow the installation of dimensionally stable formwork under water.
  • The weight of the concrete stabilises and fixes the Stremaform® jointing formwork to the seabed during concreting.

Type of building:

Harbour

Clients and Developers:

Autoridad Portuaria de Baleares
http://www.portsdebalears.com/

Building contractor:

ARGE FCC Construcción-Amer e Hijos

Completion:

2019


Products used
Contact Contact

Max Frank Pty Ltd
1/42 Balaclava Street
Woolloongabba QLD 4102
Australia