How to: Coffered ceiling with individually shaped displacers

In comparison to conventional reinforced concrete ceilings, coffered ceilings have a considerably reduced dead weight, which minimizes sagging of the ceiling. Due the construction height, the crosswise spanned ribs and the t-beam effect, large spans can be realised with a low concrete consumption.

Apart from the economic efficiency, the special design effect also supports the construction of coffered ceilings. With individually shaped recess formers, not only simple square or rectangular shapes but also visually appealing depressions, which support the architecture of the building, are designed. In addition, unique optical accents can be set using natural or artificial light sources in the coffered ceiling.

Einbauhinweis Fratec® formgebende Schalung Kassettendecke

How to:

  • Provide extensive ceiling formwork and mark the laying grid with a chalk line or rule.
  • Fasten individually prefabricated Fratec® formwork bodies to the formwork with double-sided adhesive tape and fasten formwork boards between the formwork bodies – in the area of the later ribs.
  • First reinforce the area of the ribs and then install the upper reinforcement observing the concrete cover.
  • During concreting, first apply the concrete to the Fratec® displacers in order to enable the weight of the concrete to prevent floating and seeping in behind the hollow bodies.
  • Thanks to the conical shape of the Fratec® elements, they can be easily removed after curing of the concrete. The special coating ensures an optimal concrete surface.
We recommend
Bild Bild

+1 519 759 3854

Max Frank Inc. Canada
49 Maplecrest Lane
Brantford, Ontario N3R 7T9
Canada

Use of cookies

In order to be able to optimally design the website and continue to improve it, we use cookies. By continuing to use the website, you agree to the use of cookies.  For more information, see the cookie notes.