In order to protect overbuilt existing structures such as tunnels or channels from the load of a new building situated above, a load-free separation layer can be created between the existing structure and the new building using the Egcovoid® void former.
Load Decoupling Beneath Base Slabs Using Egcovoid®
To protect existing structures such as tunnels or pipelines from additional loads caused by new buildings constructed above, the Egcovoid® void former creates a load-free layer between the new construction and the existing structure.
The Egcovoid® void former is quick and easy to install. Cutting to size can be carried out using standard tools without any difficulty. Hose connections between the individual panels are made via pre-installed valves. After installation, the system is connected using a standard irrigation hose.
Once the concrete has cured and reached full load-bearing capacity, the system is deliberately irrigated via the connected hoses. This targeted water application causes the panels to dissolve, forming a void with no structural function. As a result, the desired decoupling of loads from the structure below is achieved.
Special thanks go to the client, AUDI AG in Neckarsulm, and the contractor, KLEBL GmbH in Neumarkt, for allowing video footage to be taken directly on site.
October 2026




Max Frank Middle East FZE
M3-15, P. O. Box: 123601
Saif Zone, Sharjah
United Arab Emirates