Sub-structure waterproofing system Zemseal^®

Construction seal with high quality usage of basements

Additional waterproofing measures are usually required to meet all the structural and physical requirements that arise in waterproof structures. In the case of high usage requirements, the use of a safe, fresh concrete composite system has proven its worth. Our Zemseal^® FBV system encloses the water-impacted building components and forms a secure and integral external waterproof protection. MAX FRANK Zemseal^® FBV technology combines mechanical and adhesive bonding - "dual-bond" technology.

Advantages

Dual-Bond Technology: mechanical and adhesive bond
Tested leakage protection
Excellent crack bridging
High material efficiency (only 50 mm joint overlap)
Suitable for high-pressure cleaning
Simple handling due to low roll weight
Effective diffusion barrier - protection against radon gas
European Technical Assessment (ETA)
German National Approval

Zemseal^® Pre-applied waterproofing membrane © www.maxfrank.com

Residential and commercial building at the Danube © Mader Bau GmbH

Airport Connection Zadar © www.maxfrank.com

Complete tanking with Zemseal^® the solution for concrete substructures © www.maxfrank.com

Please accept external cookies to watch this video.

Wall surface wit pre-applied system © www.maxfrank.com

Pre-applied waterproofing membrane Zemseal^® © www.maxfrank.com

Lower reinforcement layer installed © www.maxfrank.com

Finished wall surface with Zemseal^® © www.maxfrank.com

Corner formation with pre-applied membrane © www.maxfrank.com

Waterproofing surface with Zemseal^® - joints with Fradiflex^® © www.maxfrank.com

Waterproofing membrane Zemseal^® combined with metal waterstop © www.maxfrank.com

Tested bonding with the Zemseal^® self-adhesive joint © www.maxfrank.com

Zemseal^® combined with Fradiflex^® © www.maxfrank.com

Zemseal^® flex mesh © www.maxfrank.com

Zemseal^® flex render © www.maxfrank.com

Zemseal Tape 50S © www.maxfrank.com

Zemseal^® Tape Fleece © www.maxfrank.com

Zemseal^® epoxy resin mortar © www.maxfrank.com

Zemseal^® sub-structure waterproofing system - Bored pile wall © www.maxfrank.com

Please accept external cookies to watch this video.

Zemseal^® cleaning © www.maxfrank.com

Please accept external cookies to watch this video.

Sub-structure waterproofing system Zemseal^® © www.maxfrank.com

Please accept external cookies to watch this video.

Zemseal^® Sub-structure waterproofing system © www.maxfrank.com

Show entire gallery

Product variants

Sub-structure waterproofing system Zemseal^®

with robust nap structure

Zemseal^® is dual thermally laminated and is coated on the concrete side with a strong polymer-coated geotextile with nap structure. The napped structure increases the specific surface and can integrate deeper into the concrete matrix than is possible with flat or soft fleeces.
A high-strength, extremely chemical and temperature-resistant polypropylene plastic membrane also forms the waterbearing side.

High material efficiency (including just 5 cm lapping)
Can be used in any weather (application range 0 ° C to 50 ° C)

System solution

Product download

Sealing Technologies - Price List 2022 (Please not the current surcharges)

(1,78 MB)

Sealing Technologies - for watertight concrete structures

(11,65 MB)

Test certificates / approvals

Technical data sheet

Application guidelines / instruction of use

FAQ

Environmental declarations

CAD details / BIM data

Safety data sheets

Advice

Are you interested in one of our products?

Our team of specialists are always on-hand to help.
Please talk to us or complete the contact form.

Find contact

Still not found the right solution?

We shall be happy to work together with you on an individual solution for your building project – from product combinations to custom-made products.

Learn more

News Archive

Watertight surface Zemseal^® - detail bored pile wall (#2)
News | Jul 2022
Waterproof construction plus sub-structure waterproofing system
News | Jul 2022
Watertight surfaces detail: Zemseal^® transition slab-wall (# 1)
News | May 2022
Water stop in concrete working joints
News | Feb 2022
High quality sealing of waterproof structures
News | Aug 2021
How to: Surface sealing of bored pile walls
News | Oct 2020
Zemseal^® waterproofing membrane cleaning
News | Aug 2020
Twice the bond - twice the strength!
News | Jun 2020

All news for this product

Max Frank recommends

Fibre concrete sealing cones and plugs for straightforward sealing of anchor openings.

ProductSealing cones and plugs

All types of impermeable structures made of concrete require corresponding joint waterproofing.

NewsWater stop in concrete working joints

When sealing the surface of bored concrete piles, a flat surface is required, which can be achieved with the installation of the Pecafil^® permanent formwork.

NewsHow to: Surface sealing of bored pile walls

In one of central Lund's oldest neighbourhoods, the enriched Culture Quadrant, a new construction takes shape - the Sankt Mikael 20 property.

ProjectSankt Mikael
Lund

Select your type of structure in Max Frank Buildings to access the optimum technical product solutions for your construction project.

Buildings

For the Karlatornet high-rise building, which is currently under construction, MAX FRANK Coupler threaded connection has been supplied.

ProjectKarlatornet
Göteborg

Sub-structure waterproofing system Zemseal®

Construction seal with high quality usage of basements

Advantages

Product variants

Sub-structure waterproofing system Zemseal®

with robust nap structure

System solution

Product download

Test certificates / approvals

Sub-structure waterproofing system Zemseal® - ETA - European Technical Assessment

Sub-structure waterproofing system Zemseal® Flex Render declaration of performance

Sub-structure waterproofing system Zemseal® declaration of performance acc. to EAD/ETA

Sub-structure waterproofing system Zemseal® declaration of performance acc. to EN 13967

Sub-structure waterproofing system Zemseal® test report adhesion of liquid plastic "FRANKOSIL 1K Plus" to Zemseal®

sub-structure waterproofing system Zemseal® test report adhesion of liquid plastic „Wecryl R 230 Thix“ Fa. Westwood to Zemseal®

Sub-structure waterproofing system Zemseal® test report earthstrap

Sub-structure waterproofing system Zemseal® test report rear safety in case of damage after cleaning

Sub-structure waterproofing system Zemseal® test report plastic pipe

Sub-structure waterproofing system Zemseal® test report pile head sealing with Zemseal® epoxy resin mortar

Sub-structure waterproofing system Zemseal® test report base sealing between concrete and Zemseal®.

sub-structure waterproofing system Zemseal® test report Lateral flow resistance

Sub-structure waterproofing system Zemseal® PA declaration of performance

Technical data sheet

Sub-structure waterproofing system Zemseal®

Sub-structure waterproofing system Zemseal® acryl tape with fleece backing

Sub-structure waterproofing system Zemseal® resistance table

Sub-structure waterproofing system Zemseal® resistance table acrylic adhesive tapes and self adhesive joints

Sub-structure waterproofing system Zemseal® epoxy resin mortar

Sub-structure waterproofing system Zemseal® Flex Paste

Sub-structure waterproofing system Zemseal® tape 50S

Sub-structure waterproofing system Zemseal® PA

Sub-structure waterproofing system Zemseal® PA Sealant

Sub-structure waterproofing system Zemseal® PA Primer

Sub-structure waterproofing system Zemseal® PA Primer LT

Application guidelines / instruction of use

Sub-structure waterproofing system Zemseal® -01-base slab inner edge version 1

Sub-structure waterproofing system Zemseal® -01-base slab inner edge version 2

Sub-structure waterproofing system Zemseal® -02-base slab outer corner edge version 1

Sub-structure waterproofing system Zemseal® -02-base slab outer corner edge version 2

Sub-structure waterproofing system Zemseal® -03-base slab 1/2

Sub-structure waterproofing system Zemseal® -04-base slab 2/2

Sub-structure waterproofing system Zemseal® -06-high haunch

Sub-structure waterproofing system Zemseal® -07-Wall

Sub-structure waterproofing system Zemseal® -08-slab to wall transition with ledge

Sub-structure waterproofing system Zemseal® -09-slab to wall transition without ledge

FAQ

Sub-structure waterproofing system Zemseal® technical FAQ

Environmental declarations

Sub-structure waterproofing system Zemseal®

Zemseal® epoxy mortar

Zemseal® Flex Paste

CAD details / BIM data

Zemseal sub-structure waterproofing system

Zemseal® sub-structure waterproofing system

Safety data sheets

Advice

Are you interested in one of our products?

Still not found the right solution?

News Archive

Max Frank recommends

Up To Date

Sub-structure waterproofing system Zemseal^®

Sub-structure waterproofing system Zemseal^®

Sub-structure waterproofing system Zemseal^® - ETA - European Technical Assessment

Sub-structure waterproofing system Zemseal^® Flex Render declaration of performance

Sub-structure waterproofing system Zemseal^® declaration of performance acc. to EAD/ETA

Sub-structure waterproofing system Zemseal^® declaration of performance acc. to EN 13967

Sub-structure waterproofing system Zemseal^® test report adhesion of liquid plastic "FRANKOSIL 1K Plus" to Zemseal^®

sub-structure waterproofing system Zemseal^® test report adhesion of liquid plastic „Wecryl R 230 Thix“ Fa. Westwood to Zemseal^®

Sub-structure waterproofing system Zemseal^® test report earthstrap

Sub-structure waterproofing system Zemseal^® test report rear safety in case of damage after cleaning

Sub-structure waterproofing system Zemseal^® test report plastic pipe

Sub-structure waterproofing system Zemseal^® test report pile head sealing with Zemseal^® epoxy resin mortar

Sub-structure waterproofing system Zemseal^® test report base sealing between concrete and Zemseal^®.

sub-structure waterproofing system Zemseal^® test report Lateral flow resistance

Sub-structure waterproofing system Zemseal^® PA declaration of performance

Sub-structure waterproofing system Zemseal^®

Sub-structure waterproofing system Zemseal^® acryl tape with fleece backing

Sub-structure waterproofing system Zemseal^® resistance table

Sub-structure waterproofing system Zemseal^® resistance table acrylic adhesive tapes and self adhesive joints

Sub-structure waterproofing system Zemseal^® epoxy resin mortar

Sub-structure waterproofing system Zemseal^® Flex Paste

Sub-structure waterproofing system Zemseal^® tape 50S

Sub-structure waterproofing system Zemseal^® PA

Sub-structure waterproofing system Zemseal^® PA Sealant

Sub-structure waterproofing system Zemseal^® PA Primer

Sub-structure waterproofing system Zemseal^® PA Primer LT

Sub-structure waterproofing system Zemseal^® -01-base slab inner edge version 1

Sub-structure waterproofing system Zemseal^® -01-base slab inner edge version 2

Sub-structure waterproofing system Zemseal^® -02-base slab outer corner edge version 1

Sub-structure waterproofing system Zemseal^® -02-base slab outer corner edge version 2

Sub-structure waterproofing system Zemseal^® -03-base slab 1/2

Sub-structure waterproofing system Zemseal^® -04-base slab 2/2

Sub-structure waterproofing system Zemseal^® -06-high haunch

Sub-structure waterproofing system Zemseal^® -07-Wall

Sub-structure waterproofing system Zemseal^® -08-slab to wall transition with ledge

Sub-structure waterproofing system Zemseal^® -09-slab to wall transition without ledge

Sub-structure waterproofing system Zemseal^® technical FAQ

Sub-structure waterproofing system Zemseal^®

Zemseal^® epoxy mortar

Zemseal^® Flex Paste

Zemseal^® sub-structure waterproofing system